No need to say how important it is to have a properly working heater during the winter. If your Amana heater is not turning, resolve the issue as soon as possible. Your thermostat might be adjusting incorrectly, causing the furnace to cycle not correctly. If your thermostat has an adjustable calibration scale, adjust the heat anticipator. If this does not stabilize the unit, you may have to replace the thermostat. Dead batteries in a thermostat or control system may prevent your unit from turning on. If the unit turns on but isn’t cooling properly, your technician may perform a test to ensure it is set properly and that it is reading the correct temperatures. If everything with your thermostat is fine, your furnace might lack power. You can use your thermostat to test it. On your thermostat, turn the setting to “on” instead of “auto.” If the furnace’s fan comes on, the furnace has power. If not, it lacks power. If the unit is not operating, the compressor, fan controls or capacitor could be worn out or electric connections may have been affected by the system’s consistent starting and stopping, and on-demand operation. It will be necessary to provide a closer diagnostic of the unit parts for a failure. Don’t delay a repair assistant’s visit, contact our customer support for further details!
November 26, 2023
AC is leaking from the coil – HVAC Troubleshooting in San Diego
Have you encountered a leaking air conditioner? This causes not the most pleasant feelings and deprives you of comfort. Before solving this problem, you should determine what exactly became the source of the air conditioner flow.