Since your Frigidaire fridge hasn’t been working, no chance to use your appliance as previously. If the ice maker refuses working, check a control arm. To be sure the control arm is the problem, do a full Frigidaire ice maker reset. Depending on your model, you can perform a hard reset on your ice maker using the control panel. Hold the on/off button until the LED is red. Wait a couple of minutes and then hold the same button until it’s green. The thermostat might be doubtful. Inside the control module of the ice maker is a thermostat which monitors the temperature of the ice mold (ice tray). Once the mold reaches the proper temperature, the ice maker starts a harvest cycle by ejecting the ice cubes and refilling with water. If the mold thermostat is defective, the ice maker doesn't advance. The thermostat can be checked for continuity. Replace it as needed. The freezer temp should be between 0-5 degrees for optimum performance. Also, ice makers have a relatively short lifespan, and may not always be worth fixing. If other, simpler parts like the water inlet valve or shut-off arm have been ruled out, and the only thing left is the ice maker itself, replace it as a unit. Regular refrigerator maintenance is important to get good operation from the appliance and extend its lifespan. You should set up a maintenance schedule and arrange visits of the maintenance helper. Preventative care, even in small amounts, will help save on expensive repairs or even a refrigerator replacement later on.
Post Gallery
