Your refrigerator leaking water? It could be dangerous, we recommend you to fix that problem immediately. Most common solution for GE Monogram zfsb23drgss - replacing water inlet valve. The water inlet valve opens to supply water to the dispenser and icemaker. If the water inlet valve is cracked or has a loose fitting, water will leak from the valve. Let’s start replacing!
Unplug the power cord from the wall outlet. Close the water supply cut-off valve for the refrigerator. Pull the refrigerator away from the wall. Place a towel under the water valve assembly to catch water. Loosen the compression nut on the supply water line until the water line is free. Remove the screws from the rear compartment cover and then remove the cover. Remove the screws from the mounting bracket and pull the water inlet valve out. Unplug the wire harness from the water inlet valve. Disconnect the ice maker water supply line by pressing in the fitting collar and pulling the water line out of the valve outlet. Push the ice maker water supply line into the valve outlet fitting. Reconnect the wire harness on the new water inlet valve. Position the new water inlet valve in the cabinet and install the screws in the mounting bracket. Position the rear compartment cover on the back of the refrigerator and reinstall the mounting screws. Connect the water line onto the water inlet valve fitting and tighten the compression nut firmly. Open the water supply cut-off valve. If the fitting leaks, tighten the compression nut and check again. Plug in the refrigerator and push the refrigerator back into place.
Ta-dam! You did it. You have replaced the water inlet valve in your refrigerator and fixed the problem with leaking water. If problem with water still exist - you can contact our customer support team and arrange an appointment at the convenient time.
