GE Monogram Refrigerator Repair - Not Cooling

A not cooling refrigerator is a pain in the neck for the many owners. In fact, it doesn’t really matter whether you are looking for a solution for the GE Monogram refrigerator or another brand, the issue has common roots and similar ways of elimination. We can’t claim that one of the further troubles is exactly what your appliance suffers from. However, there is a high possibility to meet the problem you are dealing with. So if your refrigerator doesn’t cool, you need to check five main parts, they are the evaporator fan, defrost system, damper control, thermistor and temperature control board. The evaporator fan makes the inside of the fridge cold. A small fan and motor are mounted near the evaporator, helping draw air over the coils and circulate it to the fridge and freezer. If this fan fails, you’ll likely be stuck with a warm refrigerator. The defrost system includes a defrost heater and defrost thermostat. In situations where the defrost heater burns out or the defrost thermostat fails, frost can build up on the evaporator coils. As these coils become frosted over, eventually no air will be able to pass through to provide cooling. The damper control is an automatic or manually operated door that opens and closes to allow more or less cold air into the refrigerator. If this door is stuck or broken, it won’t let in enough cold air to maintain a proper temperature. The thermistor is essentially a temperature sensor used in refrigerators and freezers. The sensor is supposed to send the temperature reading from the fridge to the control board, but if it’s defective, it’s likely the refrigerator will not cool. The temperature control board is like the ‘brains’ of the refrigerator, monitoring the temperature sensors, kick-starting the compressor and fans, and regulating the defrost cycle. A failed board will misread the temperature sensors, meaning the fridge will be unable to cool correctly. Many of the most common problems with your GE Monogram refrigerator can be cut short in the early phases. Contact a professional repair assistant to get all necessary help in replacing a defective part.