How to Fix Kenmore Refrigerator - Not cooling enough

In case when your Kenmore refrigerator doesn’t cool enough, the food is going to be not as fresh as it should be. You will track the temperature issue simply by facing water drops or even puddles. If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. The condenser fan motor draws air over the condenser coils to cool them. The condenser fan motor is located underneath the refrigerator near the back. A faulty fan increases the cabinet temperature, which can also overheat the compressor. This causes the compressor to eventually break down if the condenser fan isn't fixed. Pull the refrigerator out from the wall and remove the access panel to access it. A compressor could also be in doubt. The compressor moves refrigerant throughout the entire system. If the compressor looks functional but isn't starting, replace the start device and/or overload. If it's locked up or runs without compressing refrigerant, then the entire part needs to be replaced. In this case, it's recommended that you call a service technician, as the job will require the recovery and recharge of refrigerant. We can offer you custom troubleshooting help if you contact our customer support and detail the model number.