Want to start your dishwasher and you can’t because of troubles with it? Miele Dishwasher G 5023 SC not working properly? We found the most common solution - dishwasher control panel. You need to replace, just follow our easy step-by-step guide. You can doi t by yourself.
- Shutting off electrical power. Flip the house circuit breaker switch to the Off position to completely disconnect electrical power to the dishwasher.
- Removing the inner door panel. Remove the Torx screws from the inner door panel that secures the control panel to the front of the dishwasher door. Remove the screws from the inner panel.
- Disconnecting control panel. Fold the control panel forward and down. Note how the ribbon wire harness plugs into the electronic control panel—the harness usually has a locking tab or similar mechanism that keeps it in place. Release the tab and then disconnect the control panel from the wire harness.
- Disconnecting wiring connections. Remove all wiring connections from the control panel before pulling the control panel off of the dishwasher. Disconnect the other wire connection.
- Connecting the wire harness. Position the new control panel at the top of the dishwasher door so you can connect the wires.
- Reattaching the inner door panel. Install the screws in the inner door panel. Firmly tighten the screws but don't overtighten, which could strip the threads.
- Flip the house circuit breaker switch to the On position to restore electrical power to the dishwasher. The dishwasher display should light up after you restore electricity.
Done! If you feel that you need help, give us a call and appoint a visit at a convenient time!
