One of the common problem with washer - is latch issue. In this article you will learn easy guide which will hel you to fix problem on washer Maytag mmvw6200kw. If the door of a front-load washer either won't lock shut or won't open, it's likely that the door lock assembly is on the fritz. How to replace dor lock assembly? Follow the instructions.
- Unplug your washer from power. We recommend wearing gloves for the working process.
- Spin the washer so can you can work behind the it.Using the screwdriver, remove the 2 screws on the back of the washer that hold the top panel. Gently pull the top panel toward the rear of the washer and lift it up and off.
- Next step will be removing door lock assembly. Use the screwdriver to remove the mounting screws from the front of the door lock assembly. Pull the door lock assembly out and disconnect the wire harness.
- Installing new door assembly. Plug the wire harness into the new door lock assembly.Position the door lock assembly in place and secure it with the mounting screws.
- Reinstall the top panel. Push the panel down and forward to seat it the washer frame.Install the screws to secure the back panel. Avoid over tightening.
- Connect your washer to electrical power and try to open and close the door. It must be fixed!
If your washing machine still has problems you may need to call out an engineer to take an expert look at it.
Post Gallery
No items found.
