Kenmore refrigerator is not cooling (FIXED)

Freon is an odorless gas. But the compressor provides such pressure that the refrigerant condenses into liquid. The process of cooling the compartments requires a certain amount of refrigerant. Leakage reduces the performance of the appliance. The reason for the leakage of refrigerant from the refrigerator is almost always due to a violation of the operating instructions. If there is not enough freon in the refrigerator, the compressor will work without stopping, and the compartment will be warm. A technician with professional tools can eliminate both the leak and other malfunctions. Similar signs can take place due to an improperly closed door, defective gaskets, etc. The task of the repair technician is to find out where the freon has leaked, fix the leak and pump in a new portion of the refrigerant. To determine if there is freon in the refrigerator personally, you should defrost and dry the device. If after defrosting your refrigerator turns on, there is no cold inside, the condenser grid is cold - the freon has probably leaked out. What to do? The refrigerator requires a refueling. You can determine as well whether freon has flowed out when there are puddles from melted products despite the noise of a running compressor. Touch the capacitor, the grid will be cold. This is the surest indicator that the freon in the refrigerator has run out. Adding Freon to a refrigerator is a tough task. If you add too much Freon, use the wrong kind of Freon, or don’t accurately install the bullet-piercing valve, you’ll risk damaging your refrigerator permanently. Freon is also toxic and can cause a variety of health problems if you ingest it. You should only add Freon yourself if you don’t want to contact a repair company and are confident in handling a fridge. To start, identify why you fridge isn’t working properly. Check the vents on the back and inside of your freezer, and see if you need to defrost any frozen coils. Fix any leaking pipes by replacing or soldering them. Then, install a bullet-piercing valve and check the Freon by using a specialized gauge before adding the Freon.