There is a common scenario of a serious breakdown not only for Kenmore washer/dryer combo. Water starts shooting out of the liquid soap tray, not a significant amount. Then, this small flow turns into lots of water flowing out when trying to retrieve the liquid soap. You may start testing the dispenser for a failure. Possibly, there is a clog or debris that needs cleaning. If it is broken or defective replace it with a similar one. As a rule, such an issue refers to the clogged drain line. Start by running your washer through a drain cycle. Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer’s drain is most likely the issue. Use a garment bag or lint bag when appropriate to prevent the excess buildup of lint inside the drainpipes. If it’s accessible, inspect and clean your washer’s lint trap or filter. Ensure there’s at least 1/2 inch between the drainpipe and discharge hose to promote proper drainage. Use the correct detergent to prevent the buildup of soap residue. Clean your washing machine hoses and drainpipe regularly. Perform all the steps above, then stop any DIY and contact a professional plumber to check your Kenmore washer/dryer combo parts functioning. Be certain, this method is the most beneficial for the life and performance of your appliance. Don’t hesitate to contact our customer support service and arrange an appointment.
Post Gallery
