Maytag Refrigerator Won’t Cool (Repair Solution)

Most Maytag refrigerator owners are directed towards resolving one issue when the fridge doesn’t cool. Unfortunately, this problem may appear due to several defective parts at the same time. Before fixing, unload your Maytag fridge and make sure the doors close tightly. You may need to wait up to 24 hours for the temperature to drop back down. If not, it’s time to check the settings and adjust the temperature. Check the vents for obstruction. There should be vents somewhere in your refrigerator that promote air flow from the freezer to the fridge and keep things cool. Make sure these aren’t blocked by food items. A start relay will need your attention as well. The start relay works in conjunction with the start winding to start the compressor. If the start relay is defective, the compressor may sometimes fail to run or may not run at all. As a result, the refrigerator will not be cold enough. To determine if the start relay is defective, use a multimeter to test it for continuity between the run and start terminal sockets. If the start relay does not have continuity between the run and start terminal sockets, replace it. In addition, if the start relay has a burnt odor, replace it. A compressor might be working improperly. The compressor is a pump which compresses the refrigerant and circulates the refrigerant through the evaporator and condenser coils. If the compressor is not working, the refrigerator won’t cool. However, this is rarely the case. Before replacing the compressor, first check all of the more commonly defective parts. If you have determined that all of the other components are working properly, check the compressor. Use a multimeter to test the continuity between the electrical pins on the side of the compressor. If there is an open circuit, the compressor is likely defective.