Miele Dishwasher Repair: How to eliminate noise?

When your Miele dishwasher refuses to work properly and wash in spite of some sounds coming out after the start, it probably needs a diagnostic. Miele dishwashers have a "Start/Stop" light that flashes after you turn it on. If it doesn't flash, verify that the dishwasher is plugged into an outlet and that you have selected a dishwasher program. Completely close the washer door and press "Start/Stop". If the dishwasher still won't turn on, check the household circuit breaker or fuses. If the fuses are blown out, replace them. Reset the circuit breaker if tripped by turning the circuit breaker switch to the "on'' position. If the dishwasher starts, but stops, check the fuses. If your dishwasher won't start at all, open the housing and examine the door switch (four wires connected via a plastic component). Change out the switch if it's corroded or blown. Before opening the housing and examining wires, disconnect power to the dishwasher as a safety precaution. It’s possible the issue might be related to the clogged drain hose. Examine the drainage hose and straighten it if kinked. Open the dishwasher housing; examine the pump and pump belt. If the impeller on the pump is broken, replace the whole pump. If the belt is worn or split, you must get a new one. If you smell an electrical burning smell or the motor doesn't move, replace it. A garbage disposal that's connected to the dishwasher may cause a blockage from food that gets trapped in the drainage line. Run the garbage disposal as you run water in your kitchen sink to dislodge any blockage. As a safety precaution, disconnect the power to your dishwasher before opening the housing or performing any repairs or replacement. Remember that any unprofessional fixing might be fatal for your Miele dishwasher. Only a Pro could be trusted!