Not running a refrigerator could give more problems, that you think such leaking water, spoiled food and so one. First thing that you must do is find a reason for not running a refrigerator. If the refrigerator has electrical power—the inside light turns on, but the compressor won't run—possible causes include a control board failure, a wiring problem or a failed compressor. A bad compressor start relay will also prevent the compressor from running. Today we will learn how to solve this problem on refrigerator Viking vcff036ss - by replacing the compressor start relay. it’s easy to do, just follow all our instruction.
- Unplug the power cord from the wall outlet.
- Pull the refrigerator away from the wall. Remove the screws from the rear compartment cover and then remove the cover.
- Pry off the wire retainer holding the start relay on the compressor. Disconnect the wire harness from the start relay. Pull the start relay and run capacitor off the compressor.
- Transfer the run capacitor from the old start relay to the new start relay. Plug the new start relay with capacitor into the compressor terminals. Plug the wire harness into the new start relay. Reinstall the wire retainer to hold the start relay on the compressor.
- Position the rear compartment cover on the back of the refrigerator and reinstall the mounting screws.
- Plug in the refrigerator and push the refrigerator back into place.
Done! Now you must control that refrigerator works after replacing start relay, if this doesn't work, there could be a defective part that requires a replacement, and you may need to consult a professional.
