Even if several parts of your LG refrigerator are out of order, it will cost less to fix them than buy a new appliance. In the situation when the indicator says the correct temperature but the fridge isn’t cooling enough, the owner has to run a full diagnostic. Start checking with a compressor. Before replacing the compressor, first check all of the more commonly defective parts. If you have determined that all of the other components are working properly, check the compressor. Use a multimeter to test the continuity between the electrical pins on the side of the compressor. If there is an open circuit, the compressor is likely defective. If the compressor is defective, it must be replaced by a licensed technician. In an LG refrigerator, the start relay is a very important part of the cooling system. It works in conjunction with the compressor unit of the refrigerator and if it is not working properly or not working at all it will prevent the compressor unit from working properly or not at all. You will need to gain access to the bottom part of the refrigerator by opening the back access panels. The first thing is you need to do is pull out the refrigerator so that you can unplug it from the outlet and disconnect the water line if attached. Pay your attention to the state of the sealed system. It might be overused with the time so that it will require a replacement.
November 26, 2023
AC is leaking from the coil – HVAC Troubleshooting in San Diego
Have you encountered a leaking air conditioner? This causes not the most pleasant feelings and deprives you of comfort. Before solving this problem, you should determine what exactly became the source of the air conditioner flow.
