It is recommended to eliminate the issue with your refrigerator not dispensing cold water and ice as soon as you first come across with the issue. It looks like general functioning won’t lose its efficiency if you ignore the trouble. In contrast, it’s just the first sign of a bigger breakdown. The dispenser control board governs most of the functions of the dispenser system. If only one dispenser part is not working, it is probable that an individual part has failed. In this case, test each of the dispenser components before testing the control board. If the entire dispenser system is not working, the control board is more likely to be at fault. If one of the dispenser switches is defective, the dispenser will not work. To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it. The door switch turns off the ice and water dispenser when the refrigerator door is open. If the door switch fails, the dispenser will not turn on. To determine if the door switch is defective, use a multimeter to test it for continuity. If the compressor does not come on when the start relay tries to start, then the start relay will try again in a short time, which typically occurs in intervals of two to five minutes. This repeated clicking is a likely signal that the start relay has failed and needs to be replaced. Think twice before doing any fixing yourself as it may not improve the situation and take too much time. Call a Pro to eliminate the issue without any problems.
Post Gallery
