Water on the floor under your Sub-Zero refrigerator alerts about a breakdown. Ice and food particles could block the drain line preventing condensed water during the defrost cycle from flushing to the pan. When the water is overflowing, it starts to spread out all over the fridge bottom and on the floor. The best way to fix defrost drain’s blockage is to rinse it with the hot water. If soft cleaning does not help, you can use a special tool or a short piece of wire to remove the obstacle. This is the most common problem, so it always helps to check your fridge defrost drain regularly in order to prevent such a malfunction. However, the gasket also plays an important role in the normal functioning of the appliance. When the door doesn’t close tightly, if it opens easier than closes or you see defects on the rubber, the gasket (or seal) needs a replacement. If you’ve never installed a refrigerator door gasket before, you should know that installing one is no simple task – it takes skill and a lot of patience. If the door gasket isn’t a perfect fit for your refrigerator, not only will it be a bigger pain to install, it may not even fix your problem—a bad fit is a poor seal. A professional repair assistant will help you to purchase and exchange a new gasket without any problems. Give us a call ASAP!
Post Gallery
