Thermador Dishwasher Error Code E24 (Repair)

The owners of the Thermador dishwasher start panic when they notice an error code E24 on the display. Despite the fact it is an indication of the drain water system issue, you will probably eliminate the problem yourself. The manufacturer informs that the problem is caused by the drain hose bent or its clogging. The filter, located at the bottom of the dishwasher, can be removed quite easily. Clean the drain hose with the help of a rope brush. Moreover, under the filter, you can remove the plastic plug, which provides access to the cogwheel of the drain pump. Then, you have to inspect it and remove any debris. Everything seems to be easy, all you need is to straight and clean the drain hose. Still, we expect that the problem was not caused by clogging. Probably, the hose can’t bend because the device is set correctly and you don’t touch the hose. Moreover, in most cases, as users say, the fault appears in the beginning of washing, about 1.5-2 minutes after turning on, when the device does not even have time to gain water. Therefore, it is very strange that the instruction says that the E24 error informs about the drain water system malfunction. At this point honestly everything is checking out for this error so unless it is a false error on the control or something else could be causing it. Don’t hesitate to contact experts to track the origins of the error code and deal with it faster.