Learn why your thermador hood stops working. Some Thermador range hoods use an electro-mechanical switch to control the exhaust fan. The fan switch activates the fan and controls the fan speed. If the fan switch doesn't work properly, the hood refuses to work. The owner may shut off the house circuit breaker to disconnect electrical power to the range hood. Pull the latch tabs to release the air filters and pull both filters out of the range hood. Remove the screws that secure the bottom panel to the range hood frame and pull the bottom panel out of the range hood. Disconnect the wires from the fan switch. Squeeze the locking tabs together on the fan switch and push the fan switch out of the front of the control panel. Push the new fan switch into the opening in the control panel and snap the new fan switch into place. Reconnect the wires to the new fan switch. Slide the bottom panel into place. Secure the bottom panel with the mounting screws. Reinstall the air filters. Reset the house circuit breaker to restore electrical power to the range hood. Or simply contact our customer support and arrange a maintenance visit at a convenient time to forget about the issue and get a proven solution. Remember to schedule a regular range hood cleaning. It will prolong the lifespan of your unit and provide top efficiency of the Thermador hood as well.
November 26, 2023
AC is leaking from the coil – HVAC Troubleshooting in San Diego
Have you encountered a leaking air conditioner? This causes not the most pleasant feelings and deprives you of comfort. Before solving this problem, you should determine what exactly became the source of the air conditioner flow.
