Thermador Microwave Door Switch Repair

Your Thermador microwave will lose its efficiency non-stop in case of a breakdown. Door switch issues refer to the most common troubles. Microwave door switch is normally open. When the microwave door is shut, the door switches close to send power to the microwave. If this switch fails, the microwave will not start. It is an often scenario when the door switch might be failing intermittently. Check each of the door switches for signs of overheating, arcing, or burning. If you don’t see any obvious signs of failure, use a multimeter to test each switch for continuity. If any of the switches is visibly damaged or only has intermittent continuity, replace it. Remember to clean your appliance regularly and follow manufacturer's instructions. Before cleaning, unplug the microwave. If the outlet is inaccessible, leave the microwave door open while cleaning. Make sure all parts are cool before cleaning. Wipe with a damp cloth and dry with a soft cloth. A mild detergent may also be used. Do not use oven cleaners, cleaners that contain chlorine and other harsh and abrasive cleaning detergents. To prevent baked-on soil, clean food spatters or spilled liquids as they occur. To help loosen soil before cleaning, heat 2 cups of water in a 4-cup measuring container at high power for 5 minutes or until boiling. Fortunately, our maintenance visit combines diagnostic and cleaning service so that the owner will have nothing to worry about.