Why is your Day & Night Air Conditioner air conditioner not cooling? The first reason is the most banal, it is also the most common - filter contamination. You can handle this on your own: open the lid of the indoor unit, pull out two mesh rectangles covered with a layer of dust (these are the filters) and rinse them with cool water. Then dry and put back in their place.

‍

If the filters are not cleaned in time, dirt gets between the heat exchanger plates, preventing air movement. The fan also suffers - it is the most difficult to clean. The fan drum becomes shaggy from layers of dust and cannot drive air. Place your hand next to the air conditioner to understand if the unit works improperly: the air pressure is very weak! It's time for an air conditioner cleaning! It is necessary to clean not only the indoor unit of the split system, but also the outdoor unit, because dirt also collects in its heat exchanger. Dirty air conditioners cool worse!

‍

In fact, there are many more reasons for poor cooling. For example, the wear of a compressor or its valves, a broken pipe, air entering the refrigeration circuit, an electronics failure, a compressor shutdown due to an overflow of the drain pump... Prime Air solutions experts will determine what happened to the air conditioner on the spot and fix it!

‍

If you need to know How to get rid of not cooling Day & Night Air Conditioner, give us a call at (619) 655-3355 for more details!

‍